Integration of epitaxial La2/3Sr1/3MnO3 thin films on silicon-on-sapphire substrate for MEMS applications

نویسندگان

چکیده

We report the integration of high-quality epitaxial La2/3Sr1/3MnO3 (LSMO) thin films onto SrTiO3 buffered Silicon-on-Sapphire (SOS) substrates by combining state-of-the-art film growth techniques such as molecular beam epitaxy and pulsed laser deposition. Detailed structural, magnetic electrical characterizations LSMO/STO/SOS heterostructures show that LSMO properties are competitive with those directly grown on oxide substrates. X-ray circular dichroism measurements Mn L2,3 edges strong dichroic signal at room temperature, angular-dependent in-plane magneto-optical Kerr magnetometry reveal isotropic anisotropy. Suspended micro-bridges were thus finally fabricated silicon micromachining, demonstrating potential use integrating layer industrially compatible SOS for development applicative MEMS devices.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Tin Oxide Thin Films Grown on the (1̄012) Sapphire Substrate

Tin oxide thin films were deposited on the R-cut sapphire substrate by the electron-beam evaporation of a ceramic SnO2 source. X-ray diffraction and transmission electron microscopy studies revealed that the films deposited at lower temperatures were amorphous while those grown at temperatures above 350◦C consisted of the α-SnO phase with the PbO type structure. Epitaxial α-SnO films on the R-c...

متن کامل

TiNi-based thin films for MEMS applications

In this paper, some critical issues and problems in the development of TiNi thin films were discussed, including preparation and characterization considerations, residual stress and adhesion, frequency improvement, fatigue and stability, as well as functionally graded or composite thin film design. Different types of MEMS applications were reviewed and the prospects for future advances in fabri...

متن کامل

Epitaxial growth of gallium nitride thin films on A-plane sapphire by molecular beam epitaxy

In this article, we propose a crystallographic model to describe epitaxy of GaN on ~112̄0! sapphire ~A plane!. The ~11̄02! cleavage plane in sapphire is shown to extend to the GaN lattice as the ~112̄0! plane, facilitating the formation of cleaved facets. It is shown that, although the lattice mismatch is much smaller than in the case of epitaxy on ~0001!, the difference in the planar symmetry in ...

متن کامل

Oxidation and phase transitions of epitaxial tin oxide thin films on „1̄012... sapphire

We studied the structural behavior and electrical transport properties of epitaxial a-SnO thin films grown on the (1̄012) a-Al2O3 ~sapphire! substrate. Hall effect measurements revealed that the epitaxial as-deposited SnO film is a p-type semiconductor. In situ x-ray diffraction studies show that the a-SnO phase is metastable and will transform into SnO2 with the rutile type structure when annea...

متن کامل

Sol – Gel Spin Coated Cadmium Sulphide ‎Thin Films on Silicon (1 0 0) Substrates for ‎Optoelectronic Applications

Cadmium chalcogenides with appropriate band gap energy have been attracting a great deal of attention because of their potential applications in optoelectronic devices. In this work CdS thin films were deposited on p – type silicon substrates by sol – gel spin coating method at different substrate temperatures. The CdS deposited wafers were characterized by X‐ray diffracti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied Surface Science

سال: 2022

ISSN: ['1873-5584', '0169-4332']

DOI: https://doi.org/10.1016/j.apsusc.2021.152095