Inspection of Delamination Defect in First Wall Panel of Tokamak Device by Using Laser Infrared Thermography Technique
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولExperimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography
An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...
متن کاملMulti-spot Laser Scanning Thermography for Delamination Inspection GFRP Structure in CFRP/GFRP Structure
In this study, a multi-spot laser scanning thermography (MLST) system is developed for automated, rapid and long-range inspection of delamination in composite structures. First, thermal waves are generated by scanning a multi-spot laser beam over a target composite structure, and the corresponding thermal waves are measured by using an infrared (IR) camera. Then a thermal image processing algor...
متن کاملEfficient Inspection for Gas Pipes by Infrared Thermography
Gas pipe failure caused by inner corrosion defects is one of the risk factors for the unscheduled shutdown of a plant. The pipes must be inspected to reduce the risk, but this requires a great amount of time and money, since gas pipes are quite long. This research proposes a screening method for the efficient inspection of gas pipes caused by aqueous corrosion. This screening method consists of...
متن کاملDefect detection in ceramic materials by quantitative infrared thermography
In this paper infrared (IR) measurements and dedicated signal processing algorithms were developed and applied for defect detection on green ceramic tiles. Tiles with defects having known dimension and position were realized and tested by acquiring either heating and cooling transients of the tile subjected to thermal pulse excitation. As rarely defects appear directly in the thermal map, post-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Plasma Science
سال: 2018
ISSN: 0093-3813,1939-9375
DOI: 10.1109/tps.2018.2803282