Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties
نویسندگان
چکیده
منابع مشابه
Effect of fiber content on flexural properties of glass fiber-reinforced polyamide-6 prepared by injection molding.
The use of non-metal clasp denture (NMCD) materials may seriously affect the remaining tissues because of the low rigidity of NMCD materials such as polyamides. The purpose of this study was to develop a high-rigidity glass fiber-reinforced thermoplastic (GFRTP) composed of E-glass fiber and polyamide-6 for NMCDs using an injection molding. The reinforcing effects of fiber on the flexural prope...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملEffect of monomer composition of polymer matrix on flexural properties of glass fibre-reinforced orthodontic archwire.
To compare force levels obtained from glass fibre-reinforced composite (FRC) archwires. Specifically, FRC wires were compared with polymer matrices having different dimethacrylate monomer compositions. FRC material (E-glass provided by Stick Tech Ltd, Turku, Finland) with continuous unidirectional glass fibres and four different types of dimethacrylate monomer compositions for the resin matrix ...
متن کاملThe influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced Polyamide 6,6
Results of an investigation of the mechanical performance of injection moulded long glass-fibre reinforced polyamide 6,6 composites are presented. The glass-fibre content in these composites was varied over the range of 10-50% by weight using fibres with average diameters of 10, 14 and 17 μm. Impact testing was carried out at -40, 23 and 80°C on dry-as-moulded and boiling water conditioned samp...
متن کاملFlexural strength of polyamide 6 intercalated/exfoliated cements
Polyamide 6 intercalated/exfoliated (PIE) cements are fabricated and characterized. With the reinforcing nanointerphase, the flexure strength of a PIE cement is higher than that of ordinary cements by an order of magnitude. The optimum nanointerphase content is around 10 wt.%. This technique has great potential in developing advanced precast and repair technologies. © 2005 Elsevier B.V. All rig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Express Polymer Letters
سال: 2007
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2007.64