Injection molding of bushes made of tribological PEEK composites
نویسندگان
چکیده
منابع مشابه
Tribological Behavior and Mechanical Properties of Graphene/PEEK Composites
PEEK has been implemented in various orthopaedic applications due to its many beneficial mechanical, tribological, and radiolucent properties. These properties can be further tailored by introducing fillers into the PEEK matrix. In this work, graphene has been incorporated due to its high mechanical resistance, intrinsic stiffness, and lubricating properties [2].
متن کاملOn the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
متن کاملFABRICATION OF PIEZOELECTRIC CERAMlClPOLYMER COMPOSITES BY INJECTION MOLDING
Research at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer composites. As part of an ONR-funded initiative to develop cost-effective manufacturing technology for these composites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper bri...
متن کاملPrecision Injection Molding PRECISION PROCESS CONTROL OF INJECTION MOLDING
1 INTRODUCTION The technical requirements of precision injection molded components demand a heightened level of process performance, and with corresponding process monitoring and control technologies. To obtain the desired critical to quality attributes (CTQs) of the molded products, the injection molding process must be consciously designed such that the key process variables (KPVs) are observ...
متن کاملTribological behavior of PEEK components with compositionally graded PEEK/PTFE surfaces
PEEK is a high strength engineering thermoplastic that suffers from a high friction coefficient and a friction induced wear mode. Past studies with 0 m PEEK and PTFE powders resulted in composite solid lubricant that (at the optimal composition) had a wear rate of k= 2× 10−9 mm3/Nm ith a friction coefficient of μ= 0.12. A compositional grading of PEEK and PTFE is implemented in this study to cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Express Polymer Letters
سال: 2007
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2007.113