Initial rotational stiffness of tubular joints with axial force in chord
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Elliptical Chord: Tubular T-Joints
The work presents the Finite element study of the effect of elliptical chords on the static and dynamic strength of tubular T-joints using ANSYS. Two different geometry configurations of the T-joints have been used, namely Type-1 and Type-2. An elastic analysis has been considered. The Static loading conditions used are: axial load, compressive load, In-plane bending (IPB) and Out-plane bending...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملIn Vivo Passive Axial Rotational Stiffness of the Thoracolumbar Spine
The objective of this study was to report the passive axial rotational stiffness of the thoracolumbar spine in asymptomatic volunteers. A secondary objective was to investigate if an asymmetry exists between right and left axial rotational spine stiffness. Eighteen young asymptomatic volunteers, nine male and nine female, were tested using a previously validated axial rotational tester. Volunte...
متن کاملEffect of segmental joint stiffness on tunnel lining internal forces under static conditions
According to the wide application of segmental lining in mechanized tunneling, recognizing the behavior of segmental lining joints is important in tunnels designing. In the structural analysis of the tunnel segmental lining, segmental joints can be considered as elastic joints, and their stiffness characteristics are affected by the rotational, shear, and axial stiffness. The purpose of this wo...
متن کاملEvaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel)
The joints between segmental rings can withstand a certain amount of bending moment as well as axial and shear forces. Generally, in the structural analysis of tunnel segmental lining, the joints can be modeled as elastic hinges or rotational springs, and their rigidity should be demonstrated in terms of the rigidity of the joints or their rotational stiffness. Therefore, the bending moment act...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Rakenteiden Mekaniikka
سال: 2017
ISSN: 1797-5301,0783-6104
DOI: 10.23998/rm.64857