Initial Bacterial Adhesion on Different Yttria-Stabilized Tetragonal Zirconia Implant Surfaces in Vitro
نویسندگان
چکیده
منابع مشابه
Initial Bacterial Adhesion on Different Yttria-Stabilized Tetragonal Zirconia Implant Surfaces in Vitro
Bacterial adhesion to implant biomaterials constitutes a virulence factor leading to biofilm formation, infection and treatment failure. The aim of this study was to examine the initial bacterial adhesion on different implant materials in vitro. Four implant biomaterials were incubated with Enterococcus faecalis, Staphylococcus aureus and Candida albicans for 2 h: 3 mol % yttria-stabilized tetr...
متن کاملInitial bacterial adhesion on resin, titanium and zirconia in vitro
PURPOSE The aim of this in vitro study was to investigate the adhesion of initial colonizer, Streptococcus sanguis, on resin, titanium and zirconia under the same surface polishing condition. MATERIALS AND METHODS Specimens were prepared from Z-250, cp-Ti and 3Y-TZP and polished with 1 µm diamond paste. After coating with saliva, each specimen was incubated with Streptococcus sanguis. Scannin...
متن کاملFracture resistance of yttria-stabilized zirconia dental implant abutments.
PURPOSE An in vitro study was performed to assess the effect of different degrees of clinical reduction of zirconia abutments on the failure load of clinical assemblies. MATERIALS AND METHODS Zirconia abutments (Y-TZP Ceramic Abutment, Astra Tech) were prepared with 0, 0.5, or 1 mm of external axial reduction starting 1 mm above the height-of-contour. Abutments (n = 10) were attached to impla...
متن کاملEffect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal yttria-stabilized zirconia
The thermal conductivity of yttria-stabilized zirconia (YSZ) thermal barrier coatings increases with high-temperature aging. This common observation has been attributed to the densification of the coatings as porosity sinters out and pores and cracks spheroidize to minimize their surface energy. We show that the thermal conductivity of fully-dense 3 mol.% Y2O3 stabilized zirconia (3YSZ) also in...
متن کاملCharacteristics of yttria stabilized tetragonal zirconia powder used in optical fiber connector ferrule
The tetragonal to monoclinic (t ! m) phase transformation during low temperature ( 100 8C) degradation (LTD) of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) sintered in air at different temperatures was investigated. It is found that the sintering temperature affected the density, crystalline phase and microstructure of the sintered body, as well as the LTD behavior. Also, the ons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2013
ISSN: 1996-1944
DOI: 10.3390/ma6125659