Influences of solid and lubricant thermal conductivity on traction in an EHL circular contact

An Investigation into Grease Behavior in Thermal EHL Circular Contacts

The behaviors of two lithium lubricating greases were investigated under EHL circular contact through measurements of traction coefficients on a self-made rig in which the contact was continuously fed with fresh grease. The average values of Erying shear stress and shear modulus of the two lithium greases were obtained from traction experimental data using this rig. Based on the Evans-Johnson m...

An experimental investigation on effect of hybrid solid MWCNTs and MgO on thermal conductivity of ethylene glycol

In recent decade, the new advanced nanofluids, composed from various particles, have attracted the attention of researchers. This class of nanofluids, which can be prepared by suspending several types (two or more than two) of nanoparticles in base fluid, is termed as hybrid nanofluids. In this work, an experimental investigation on the effects of temperature and concentration of nanoparticles ...

Effect of solid thermal conductivity and particle-particle contact on effective thermodiffusion coefficient in porous media

Thermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber

We have measured the thermal resistance of a 152-nm-diameter carbon nanofiber before and after a platinum layer was deposited on the contacts between the nanofiber and the measurement device. The contact resistance was reduced by the platinum coating for about 9–13% of the total thermal resistance of the nanofiber sample before the platinum coating. At a temperature of 300 K, the axial thermal ...

Thermal Conductivity and Thermal Contact Resistance of Metal Foams

Unique specifications of metal foams such as relatively low cost, ultra-low density, high surface-area-to-volume ratio, and most importantly, the ability to mix the passing fluid provide them a great potential for a variety of thermal-fluidics