Influences of Base Motions on Additional Excitations of Floating Wind Turbine Gearbox Transmission System
نویسندگان
چکیده
منابع مشابه
Study of Intelligence Diagnosis System for Wind Turbine Gearbox Fault
According to the current application and maintenance situation of gearbox of wind turbine, this paper analyzed the remote fault diagnosis system used for monitoring fault occurrence and diagnosing fault, which is a combination of Expert System and Artificial Neural Networks. A practical fault instance of gearbox of wind turbine is analyzed to define the expert system’s knowledge base structure ...
متن کاملDynamic Analysis of Wind Turbine Gearbox Components
Abstract: This paper studies the dynamic response of a wind turbine gearbox under different excitation conditions. The proposed 4 degree-of-freedom (DOF) dynamic model takes into account the key factors such as the time-varying mesh stiffness, bearing stiffness, damping, static transmission error and gear backlash. Both the external excitation due to wind and the internal excitation due to the ...
متن کاملIntegrated Optimization of Floating Wind Turbine Systems
The purpose of this paper is to show an exemplary methodology for the integrated conceptioning of a floating wind turbine system with focus on the spar-type hull and the wind turbine blade-pitch-to-feather controller. It is a special interest to use a standard controller, which is easily implementable, even at early design stages. The optimization of the system is done with adapted static and d...
متن کاملDamping Wind and Wave Loads on a Floating Wind Turbine
Offshore wind energy capitalizes on the higher and less turbulent wind speeds at sea. To enable deployment of wind turbines in deep-water locations, structures are being explored, where wind turbines are placed on a floating platform. This combined structure presents a new control problem, due to the partly unconstrained movement of the platform and ocean wave excitation. If this additional com...
متن کاملOperational Modal Analysis of Wind Turbine Speed- increase Gearbox
Speed increase transmission gear box is the primary vibration and noise source of wind turbine, Operational modal method was adopted to collect impact data and response data of each point based on the gearbox test model. ANSYS finite element model is established to simulate the wind turbine gearbox. Then the modal frequencies of the two methods were compared to ensure the test model is correct....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jixie gongcheng xuebao
سال: 2023
ISSN: ['0577-6686']
DOI: https://doi.org/10.3901/jme.2023.01.035