Influence of Zr on AlSi9Cu1Mg Alloy Cast in Ceramic
نویسندگان
چکیده
منابع مشابه
Influence of Secondary Phase Particles on Zr-Alloy Plastic Flow Stability and Fracture
The influence of intermetallic particles and hydrides on the total and local ductility as well as on the fracture mechanism in Zr-2.5Nb and Zr-1Nb-1.3Sn-0.4Fe alloys was studied by the methods of acoustic emission (AE). Based on measurements of maximum (peak) values of AE amplitudes depending on secondary phase sue and distribution two alternative mechanisms were established of loss of flow sta...
متن کاملInfluence of Composition on the Environmental Impact of a Cast Aluminum Alloy
The influence of alloy composition on the environmental impact of the production of six aluminum casting alloys (Al Si12Cu1(Fe), Al Si5Mg, Al Si9Cu3Zn3Fe, Al Si10Mg(Fe), Al Si9Cu3(Fe)(Zn) and Al Si9) has been analyzed. In order to perform a more precise environmental impact calculation, Life Cycle Assessment (LCA) with ReCiPe Endpoint methodology has been used, with the EcoInvent v3 AlMg3 alumi...
متن کاملINFLUENCE OF LASER SURFACE HARDENING ON CORROSION PROPERTIES OF Al-Zn-Si CAST ALLOY
E. Tillová, L. Kuchariková, M. Chalupová, J. Belan, A. Vaško, I. Švecová, University of Žilina, Faculty of Mechanical Engineering, Slovak Republic This work is focused on the effect of the laser surface treatment (laser power 50 and 80 W) on microstructure and corrosion properties of self-hardened AlZn10Si8Mg cast alloy used for engine and vehicle constructions. The electrochemical impedance sp...
متن کاملcritical period effects in foreign language learning:the influence of maturational state on the acquisition of reading,writing, and grammar in english as a foreign language
since the 1960s the age effects on learning both first and second language have been explored by many linguists and applied linguists (e.g lennerberg, 1967; schachter, 1996; long, 1990) and the existence of critical period for language acquisition was found to be a common ground of all these studies. in spite of some common findings, some issues about the impacts of age on acquiring a second or...
15 صفحه اولInfluence of ceramic surface texture on the wear of gold alloy and heat-pressed ceramics.
The purpose of this study was to evaluate the influence of ceramic surface texture on the wear of rounded rod specimens. Plate specimens were fabricated from zirconia (ZrO2), feldspathic porcelain, and lithium disilicate glass ceramics (LDG ceramics). Plate surfaces were either ground or polished. Rounded rod specimens with a 2.0-mm-diameter were fabricated from type 4 gold alloy and heat-press...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2023
ISSN: ['1897-3310', '2299-2944']
DOI: https://doi.org/10.24425/afe.2020.131295