Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
نویسندگان
چکیده
منابع مشابه
Tool Life, Wear Rates, and Surface Quality in Hard Turning
An on-going comparative study of wear rates and tool lives under varying cutting parameters is presented in this paper, along with results indicating the abilities and limitations of the hard turning process to produce finished surfaces with acceptable roughness and integrity. To date, the study has consisted of thirteen combinations of machining conditions. The tests were performed with four d...
متن کاملPredictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models
The tool wear is an unavoidable phenomenon when using coated carbide tools during hard turning of hardened steels. This work focuses on the prediction of tool wear using regression analysis and artificial neural network (ANN).The work piece taken into consideration is AISI4140 steel hardened to 47 HRC. The models are developed from the results of experiments, which are carried out based on De...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Superhard Materials
سال: 2017
ISSN: 1063-4576,1934-9408
DOI: 10.3103/s1063457617030078