Influence of Ti/N ratio on simulated CGHAZ microstructure and toughness in X70 steels
نویسندگان
چکیده
منابع مشابه
Influence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...
متن کاملcritical period effects in foreign language learning:the influence of maturational state on the acquisition of reading,writing, and grammar in english as a foreign language
since the 1960s the age effects on learning both first and second language have been explored by many linguists and applied linguists (e.g lennerberg, 1967; schachter, 1996; long, 1990) and the existence of critical period for language acquisition was found to be a common ground of all these studies. in spite of some common findings, some issues about the impacts of age on acquiring a second or...
15 صفحه اولThe Role of the Bainitic Packet in Control of Impact Toughness in a Simulated CGHAZ of X90 Pipeline Steel
X90 pipeline steel was processed with the simulated coarse grain heat affect zone (CGHAZ) thermal cycle with heat input varying from 30 kJ/cm to 60 kJ/cm, the microstructures were investigated by means of optical microscope (OM), scanning electron microscope (SEM), electron backscattering diffraction (EBSD), and transmission electron microscope (TEM), and the impact properties were evaluated fr...
متن کاملHeat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels
Microstructures and Charpy impact properties have been examined in two microalloyed steels following heat treatments to simulate weld heat affected zone (HAZ) structures over a range of heat input conditions, characterised by the cooling time from 800 to 500 !C (Dt8/5). The base materials were low carbon structural steel plates microalloyed with vanadium and nitrogen (V–N) and niobium (Nb), res...
متن کاملTesting Samples Size Effect on Notch Toughness of Structural Steels
The increasing need in the mechanical testing of sub-sized samples motivated the present study focused on the effect of the size of samples. Sometimes, attempts are made, due to economic reasons, to replace testing of the fracture toughness by a cheaper testing of notch toughness. Several empirical relations, pertaining to relations between fracture toughness and energy consumption in impact te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Technology of Welding and Joining
سال: 2013
ISSN: 1362-1718,1743-2936
DOI: 10.1179/1362171812y.0000000071