Influence of thermomechanical processing on shear bands formation and magnetic properties of a 3% Si non-oriented electrical steel
نویسندگان
چکیده
منابع مشابه
Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel
Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...
متن کاملInfluence of Antimony on the Texture and Properties of 2 % Si , 0 . 3 % A 1 Steel for Non - Oriented Sheet
The effect of additions of antimony (0.05% Sb) to silicon steel on the improvement of the electrical properties of non-oriented steel sheet was investigated. Measurements of surface segregation of Sb were performed under UHV conditions in the temperature range from 450 to 900 OC, using AES and TDS. Maximum equilibrium surface segregation of antimony was determined at 700 OC. At higher temperatu...
متن کاملSecondary recrystallization characteristics of 3%Si grain-oriented electrical steel
A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...
متن کاملInfluence of Cutting Process on Magnetic Properties of Electrical Steel
ii Acknowledgements iii
متن کاملnon-linear study of various slit shear walls in steel structures
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Magnetism and Magnetic Materials
سال: 2011
ISSN: 0304-8853
DOI: 10.1016/j.jmmm.2011.07.015