Influence of spur dike’s angle on sand bar formation in a rectangular channel
نویسندگان
چکیده
Abstract Spur dike is one of the various technologies utilized in river rehabilitation. provides many advantages, such as promoting aquatic habitat, improving channel for navigation, and protecting stream banks. This study serves to evaluate effect a spur on formation sand bars straight rectangular fed by suspended sediment. The performance inducing investigated under three different angles. A three-dimensional (3D) model was developed using Flow-3D® investigate flow depth velocity around dike. Based distribution, influence angle bar explained. scalar concentration used represent sediment simulation, represented concentration. According numerical results, 90° produced larger longer than 45° 135° dikes.
منابع مشابه
effect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولcritical period effects in foreign language learning:the influence of maturational state on the acquisition of reading,writing, and grammar in english as a foreign language
since the 1960s the age effects on learning both first and second language have been explored by many linguists and applied linguists (e.g lennerberg, 1967; schachter, 1996; long, 1990) and the existence of critical period for language acquisition was found to be a common ground of all these studies. in spite of some common findings, some issues about the impacts of age on acquiring a second or...
15 صفحه اولsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملInfluence of Non-Uniform Wall Temperature on Local Heat Transfer Coefficient in a Rotating Square Channel
Abstract: This paper presents the results of an experimental examination of the effect of non-uniform wall temperature on local heat transfer coefficient in a rotating smooth-walled square channel. Three different thermal boundary situations were investigated: (a) even and odd (four) wall uniform temperature, (b) even and odd (four) wall uniform heat flux, and (c) even (leading and trailing) w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP conference series
سال: 2023
ISSN: ['1757-899X', '1757-8981']
DOI: https://doi.org/10.1088/1755-1315/1238/1/012027