Influence of Secondary Recrystallization Onset Temperature on Evolution of Sharp Goss Texture in Nitrided Fe-3%Si Alloy
نویسندگان
چکیده
منابع مشابه
The influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys
The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstrated that the actual microchemistry state as determined by the homogenization procedure strongly influence the recrystallized grain size and ...
متن کاملStatistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.
Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrysta...
متن کاملEFFECT OF SECOND PHASE PARTICLES TOPOLOGY ON THE ONSET TEMPERATURE OF ABNORMAL GRAIN GROWTH IN Fe - 3%Si STEELS
Electrical steels are undoubtedly the most important soft magnetic materials in use today. Applications vary in quantities from the few ounces used in small relays or pulse transformers to tons used in generators, motors, and transformers. There are two principal types of electrical steels: grain oriented and non-oriented steels. The grain oriented (GO) electrotechnical steel sheets are widely ...
متن کاملMechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel
Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is ...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1998
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.62.7_642