Influence of Second Phase Particles on Recrystallization in Fe-36Ni Alloy
نویسندگان
چکیده
منابع مشابه
Effect of Al Addition on Microstructure and Physical Properties of Fe-36Ni Invar Alloy
High strength Fe-36Ni-base Invar alloys containing Al contents up to 0.3 weight percent were cast into ingots and thermodynamic equilibrium during solidification has been investigated in this study. From the thermodynamic simulation using Thermo-Calc®, it has been revealed that equilibrium phases which can be formed are two kinds of MC-type precipitates, MoC, and M2C carbides. The mu phase was ...
متن کاملInfluence of Secondary Phase Particles on Zr-Alloy Plastic Flow Stability and Fracture
The influence of intermetallic particles and hydrides on the total and local ductility as well as on the fracture mechanism in Zr-2.5Nb and Zr-1Nb-1.3Sn-0.4Fe alloys was studied by the methods of acoustic emission (AE). Based on measurements of maximum (peak) values of AE amplitudes depending on secondary phase sue and distribution two alternative mechanisms were established of loss of flow sta...
متن کاملThe influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys
The recrystallization textures of a cold-rolled Al-Mn-Fe-Si model alloy with three different microchemistry states after non-isothermal annealing were studied. The microstructure and texture evolution have been characterized by EBSD. It is clearly demonstrated that the actual microchemistry state as determined by the homogenization procedure strongly influence the recrystallized grain size and ...
متن کاملInfluence of Fe(2+)-catalysed iron oxide recrystallization on metal cycling.
Recent work has indicated that iron (oxyhydr-)oxides are capable of structurally incorporating and releasing metals and nutrients as a result of Fe2+-induced iron oxide recrystallization. In the present paper, we briefly review the current literature examining the mechanisms by which iron oxides recrystallize and summarize how recrystallization affects metal incorporation and release. We also p...
متن کاملInfluence of grain size, solute atoms and second-phase particles on creep behavior of polycrystalline solids
Diffusion-controlled-creep processes are used to assess the creep behavior of dispersion and solute hardened materials at coarse and fine grain sizes. It is shown that the creep behavior of a dispersion strengthened (DS) Al–Mg alloy is similar to the creep behavior of pure Al–Mg alloys. Both materials show dislocation climb and dislocation solute-drag contributions to creep. It is shown that th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2003
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.89.5_530