Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes
نویسندگان
چکیده
منابع مشابه
experimental investigation of surface roughness for fused deposition modelled part with different angular orientation
fused deposition modeling (fdm) is a filament based rapid prototyping system provides us to manufacture real parts with multiple production-grade materials, such as abs-m30, pc, ppsf and pc-abs blend. fused deposition modeling technology, essentially perform using layer manufacturing process. more complex 3d physical models can be efficiently fabricated without geometric limitation by this tech...
متن کاملStudy on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality
3D printing known as additive manufacturing (AM) has been applied for applications in different fields such as aerospace, automotive, biomedical, and energy industries. It is the fact that 3D printing has gained a very wide acceptance over the last decade. However, several significant hurdles prevent its wider adoption. One of the most important barriers is the quality of the printed parts. Cur...
متن کاملInfluence of Gloss and Surface Roughness of Coated Ink Jet Papers on Print Uniformity Authors
The final print quality depends on the quality of the digital image as well as the properties of the printing system, the inks and the paper used. One of the most widely used digital printing technologies is ink jet, where ink is ejected directly onto a substrate from a jet device driven by an electronic signal. Most ink jet inks have low viscosity and low surface tension, which pose high deman...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملComparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Polyetherimide (PEI) blends modified by either polycarbonate (PC) or polyethylene terephthalate glycol-modified (PETG) were prepared. The latter modifier (PETG) was an industrial grade widely used for fused deposition modelling (FDM) printing. PEI blends were compared to Ultem 9085, which is the standard PEI grade for FDM printing in advanced applications. All the blends were thoroughly charact...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12233834