Influence of Pressure in Flash Sintering Technique

8YSZ sintering by flash sintering method and evaluation of process parameters

Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...

Ultrafast-Contactless Flash Sintering using Plasma Electrodes

This paper presents a novel derivative of flash sintering, in which contactless flash sintering (CFS) is achieved using plasma electrodes. In this setup, electrical contact with the sample to be sintered is made by two arc plasma electrodes, one on either side, allowing current to pass through the sample. This opens up the possibility of continuous throughput flash sintering. Preheating, a usua...

On the Mechanism of Microwave Flash Sintering of Ceramics

The results of a study of ultra-rapid (flash) sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10-500 W/cm³) are presented. Ceramic samples of various compositions-Al₂O₃; Y₂O₃; MgAl₂O₄; and Yb(LaO)₂O₃-were sintered using a 24 GHz gyrotron system to a density above 0.98-0.99 of the theoretical value in 0.5-5 min without isothermal...

Effects of phase and doping on flash sintering of TiO2

Probing the densification mechanisms during flash sintering of ZnO

Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...