Influence of Organic Binder Composition in Alumina Compound on its Flow Properties and Feasibility for Injection Molding.
نویسندگان
چکیده
منابع مشابه
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
PVT Properties of Polymers for Injection Molding
PVT (Pressure-Volume-Temperature) properties of polymers are important for both engineering and polymer physics. Fig.1 shows the typical PVT diagrams of an amorphous (a) and semi-crystalline polymer (b). PVT diagram describes the specific volume as a function of pressure and temperature. Specific volume increases with the temperature increasing. There is a thermal transition in the polymer. The...
متن کاملthe influence of corpus luteum on follicular fluid composition from different size follicles and their relationship to serum concentrations in sanjabi ewes
the aim of the present study was to determine the in?uence of presence or absence of corpus luteum (cl) on hormonal and metabolites composition of follicular ?uid (ff) harvested from different sized follicles and its relationship with blood serum concentrations in sanjabi ewes. ovaries and blood samples were collected from 60 clinically healthy adult ewes (sanjabi breed) 1–3 years of age in dio...
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1991
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.40.1577