Influence of Mineral Fibers on Asphalt Concrete

Investigating the Effects of Nanoclay and Nylon Fibers on the Mechanical Properties of Asphalt Concrete

This paper describes the effects of reinforcement by randomly distributed nylon fibers and addition of nanoclay on some engineering properties of a typical asphalt concrete. The properties of asphalt concrete reinforced by different percentages of 25 mm nylon fibers have been compared with those of the mixtures containing different percentages of nanoclay and those in which both the fibers and ...

Use of Recycled and Waste Fibers in Asphalt Concrete

A significant problem associated with asphalt concrete mixtures is the lack of durability resulting from an inadequate asphalt cement content. Additional asphalt cement added to increase durability results in flushing, bleeding and a significant loss In stability. Fibers have been used in stone matrix asphalt and open-graded friction course pavements successfully throughout Europe to allow high...

Influence of Waxes on Bitumen and Asphalt Concrete Mixture Performance

This doctoral thesis consists of a literature review, presented in two papers, and another six papers describing experimental studies of the influence of different kinds of wax and polyphosporic acid on bitumen and asphalt concrete mixture properties. The literature review should give an extensive description of the field of knowledge concerning wax in bitumen. Effects of wax in crude oil, bitu...

Effects of Recycled Concrete Aggregates on Properties of Asphalt Concrete

The Influence of Pet Fibers on the Properties of Fresh and Hardened Concrete

There is a worldwide interest in using fibers of different types in concrete mixtures. In this regard, as the use of PET fibers has gradually increased during the last decade, this study aims to investigate the effects of PET fibers on the mechanical properties of hardened concrete and the workability of fresh concrete. To this end, different contents of PET fibers (PC= %0, %0.5, %1 and %1.5) a...