Influence of Microstructure on Chip Formation when Broaching Ferritic-Pearlitic Steels
نویسندگان
چکیده
منابع مشابه
Microstructure-based 3d Fe Modeling for Micro Cutting Ferritic- Pearlitic Carbon Steels
The mechanics of the cutting process on the microscopic level differ fundamentally from the conventional macro cutting. For example, the tool edge radius influences the cutting mechanism in micro machining significantly with regard to the effective rake angle, the minimum chip thickness, the dominance of ploughing, and the related elasto-plastic deformation of the workpiece material. These phen...
متن کاملElectropulse - induced cementite nanoparticle formation in deformed pearlitic steels
Passing one electric-current pulse through deformed pearlitic steel wires at room temperature causes the formation of cementite particles around 30 nm in size. This is found not only in some particular locations but throughout the cementite area, which reveals a different mechanism from traditional spheroidization of cementite plates because the latter leads to the formation of particles with m...
متن کاملHydrogen embrittlement of ferritic steels: Observations on deformation microstructure, nanoscale dimples and failure by nanovoiding
While hydrogen embrittlement of ferritic steels has been a subject of significant research, one of the major challenges in tackling hydrogen embrittlement is that the mechanism of embrittlement is not fully resolved. This paper reports new observations and interpretation of fracture surface features and deformation microstructures underneath the fracture surface, providing a mechanistic view of...
متن کاملInfluence of Co and Al on pearlitic transformation in superbainitic steels
Copyright and Moral Rights for the articles on this site are retained by the individual authors and/or other copyright owners. For more information on Open Research Online's data policy on reuse of materials please consult the policies page. Abstract The effect of cobalt and aluminium on the austenite-to-pearlite transformation in a super-bainitic steel was investigated. The experimental work s...
متن کاملCharacterisation of Microstructure in 9 % Chromium Ferritic Steels Using Ultrasonic Measurements
Ultrasonic measurements have been performed for comprehensive microstructural characterisation in 9 % Cr ferritic steels. The variation in grain size, the effect of solution annealing temperature on microstructure developed, the variation in microstructure of the weld joints, the effect of post weld heat treatment and precipitation behaviour during thermal ageing and creep testing have been suc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2017
ISSN: 2212-8271
DOI: 10.1016/j.procir.2017.03.181