INFLUENCE OF MACHINING PARAMETERS ON SURFACE ROUGHNESS IN WEDM CUTTING
نویسندگان
چکیده
منابع مشابه
investigation of machining parameters in wire electrical discharge machining (wedm) on the surface roughness & cutting speed of tungsten carbide
surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...
متن کاملInfluence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملPrediction of Surface Roughness in Wire Electric Discharge Machining (WEDM) Process based on Response Surface Methodology
This paper presents an investigation on WEDM of pure titanium (grade-2). An attempt has been made to model the response variable i.e. surface roughness in WEDM process using response surface methodology. The experimental plan is based on Box-Behnken design. Six parameters i.e. pulse on time, pulse off time, peak current, spark gap voltage, wire feed and wire tension has been varied to investiga...
متن کاملSurface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...
متن کاملthe effect of operational cutting parameters in the wire electro discharge machining (wedm) on micro hardness of alloy surface layer
in this study, as for the re-casting, surface alloying and re-solidification layer of this alloys at the work piece level machining with wire electro discharge machining (wedm), changes of surface micro hardness with changes of operational parameters has been studied. therefore, study shows using surface alloying phenomena with the diffusion of wire material into the machined surface and select...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Research and Innovation for Sustainable Society
سال: 2020
ISSN: 2668-0416
DOI: 10.33727/jriss.2020.2.4:27-31