Influence of Loading Conditions during Tensile Testing on Acoustic Emission
نویسندگان
چکیده
منابع مشابه
Acoustic Emission Response of Ti6al4v Alloy in Different Heat Treatment Conditions During Tensile Testing
Acoustic Emission (AE) Technique is a unique Non Destructive Testing method being used as a global online monitoring tool for detection, location and characterization of various kinds of active defects. This paper illustrates the attempt to find the AE response of Ti6Al4V Alloy in different heat treatment conditions during tensile testing. Ti6Al4V alloy is tested in mill annealed, beta annealed...
متن کاملfailure behavior assessing of wood strands under tensile loading using acoustic emission technique
with the aim of identifying failure mechanism in oriented strand boards, failure behavior of wood strands under tensile load was investigated using acoustic emission technique. resinated and unresinated strands were arranged at top, middle and bottom section of the board before pressing. tensile and acoustic emission tests were performed simultaneously on treated and control samples. using tens...
متن کاملInfluence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading
Use of composites for a range of structural application in aircrafts, space-crafts, automobiles, etc., has widely spread in the last few years. Other than weight reduction, cut-outs provide pathways to link different aircraft parts. In this paper, an experimental investigation was conducted to study the effect of a cut-out on the tensile strength of the fiber glass/ epoxy composite plate. Geome...
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملLattice strain evolution during uniaxial tensile loading of stainless steel
Applied and residual lattice strains were determined by neutron diffraction during a tensile test of a weakly textured austenitic stainless steel and were compared to the predictions of a self-consistent polycrystal deformation model. Parallel to the tensile axis the model predictions are generally within the resolution of the diffraction measurements, but perpendicular to the tensile axis disc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2014
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.626.121