Influence of Feed Motion on Surface Friction of AISI 1045 Steel Machined by a Fine-Grinding Process
نویسندگان
چکیده
منابع مشابه
Expansion and fracture of AISI 1045 steel explosive-filled cylinders
By a improved front light-source framing photography technique and a simple fragments soft recovered method, the expansion and fracture behaviour of the AISI 1045 steel cylinders loaded by three different brisance explosives have been studied . Cylinders were heat treated-normalized and quenched and tempered. Experimental results show that the more intensive of the loading ,the stronger capabil...
متن کاملAn Investigation of the Influence of Initial Roughness on the Friction and Wear Behavior of Ground Surfaces
Friction and wear tests were performed on AISI 1045 steel specimens with different initial roughness parameters, machined by a creep-feed dry grinding process, to study the friction and wear behavior on a pin-on-disc tester in dry sliding conditions. Average surface roughness (Ra), root mean square (Rq), skewness (Rsk) and kurtosis (Rku) were involved in order to analyse the influence of the fr...
متن کاملDuplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer
In this Study, surface of medium carbon steel (AISI 1045) was modified by titanizing followed by plasma nitriding. Titanizing was performed using pack cementation method, in a pack mixture of ferrotitanium, ammonium chloride and alumina, at 1223 K for 45 and 180 min. Plasma-nitriding was conducted at two temperatures of 803 and 823 K for 5 h, in a gas mixture of 75%N2+25%H2. The samples were c...
متن کاملEffect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملFractal Dimensional Surface Analysis of AISI D2 Tool Steel Material with Nanofluids in Grinding Process Using Atomic Force Microscopy
The surface analysis of nanomachined AISI D2 tool steel materials is measured using atomic force microscopy. The surface roughness and fractal dimensional analysis are the important factors in nano tribology and evaluating the quality of nanomachined surface. Carbon nanotube increases the heat carrying capacity, thermal conductivity of the lubricating oil and thus prevents any damage to the wor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology in Industry
سال: 2021
ISSN: 0354-8996,2217-7965
DOI: 10.24874/ti.943.08.20.01