Influence of dynamic geometric parameters on multi-axis machining processes
نویسندگان
چکیده
منابع مشابه
Optimization of Machining Parameters in Turning Processes by Dynamic Programming
This paper presents a method for optimizing the machining parameters in rough turning processes to control the vibrations and deformations and minimize the production time per component under practical constraints. The optimization model is formulated, in which piecewise constraints are introduced based on the varying length-to-diameter (L/D ) ratio of the workpiece. The optimization problem is...
متن کاملTool Path Modification Approaches to Enhance Machining Geometric Accuracy in 3-Axis and 5-Axis Machining
متن کامل
Influence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملInfluence of Electrical Resistivity and Machining Parameters on Electrical Discharge Machining Performance of Engineering Ceramics
Engineering ceramics have been widely used in modern industry for their excellent physical and mechanical properties, and they are difficult to machine owing to their high hardness and brittleness. Electrical discharge machining (EDM) is the appropriate process for machining engineering ceramics provided they are electrically conducting. However, the electrical resistivity of the popular engine...
متن کاملInfluence of Machining Parameters on Electric Discharge Machining of Maraging Steels – An Experimental Investigation
thermoelectric process in which heat energy of spark is used to remove material from the work piece. The machining process involves controlled erosion of electrically conducting material by the initiation of rapid and repetitive electrical spark discharges between the tool and workpiece separated by the dielectric medium. The present work is aimed at characterizing the electric discharge machin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DYNA
سال: 2020
ISSN: 2346-2183,0012-7353
DOI: 10.15446/dyna.v87n215.90417