Influence of drying technique on Pt/In2O3 aerogels for methanol steam reforming
نویسندگان
چکیده
Abstract In this paper we present a comparison of aerogels which are dried under different conditions. Of those, most important the solvent, temperature, and pressure. Criteria rely mostly on results from analysis nitrogen adsorption experiments, as well transmission electron microscopy imaging. Platinum loaded indium oxide were picked model system for study they can be used highly effective heterogeneous catalysts in methanol steam reforming. The compared drying methods include supercritical CO 2 , - ethanol mixture, freeze tert-butanol ambient conditions acetone 1-Methoxyheptafluoropropane. High porosities large specific surface areas achieved via supercritical, freeze- drying, while retaining original gel morphology except acetone.
منابع مشابه
Effect of Pt on Zn-Free Cu-Al Catalysts for Methanol Steam Reforming to Produce Hydrogen
Steam reforming of methanol can be considered as an attractive reaction aiming at hydrogen production for PEM fuel cells. Although Cu/Al-contained catalysts are considerably evaluated in this reaction, further evaluation is essential to evaluate the impact of some promoters like Pt in order to find a comprehensively optimized catalyst. Pt promoter is employed with different methods in this ...
متن کاملSteam reforming of methanol over copper-containing catalysts: influence of support material on microkinetics
Steam reforming of methanol (SRM) was investigated over copper-containing catalysts supported on four different oxides and mixed oxides: Cu/ZnO/Al2O3, Cu/ZrO2/CeO2, Cu/SiO2 and Cu/Cr2O3/Fe2O3. After observing slight differences in the way of catalyst aging and experimental exclusion of mass transport limitation effects, a detailed kinetic study was carried out at 493 K. The dependence of the re...
متن کاملZnO Nanowire-supported Ag Catalyst for Methanol Steam Reforming
Alternative energy sources, such as various fuel cell technologies, have attracted intense attention due to their high efficiency and low emissions of pollutants. Methanol, with its high hydrogen/carbon ratio, low sulfur content and the absence of carbon–carbon bonds, has been identified as a highly suitable source for onboard production of hydrogen [1]. Among several reactions for converting m...
متن کاملMethanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst
Ternary Cu/ZnO/metal oxide catalysts are prepared through the co-precipitation method under strict control of parameters like pH, calcination conditions, and precipitation temperature in a systematic manner. The metal oxides applied in this study consist of Al2O3, ZrO2, La2O3 and Ce2O3. The distinction of this work in comparison with similar research is a comprehensive investigatation of the ca...
متن کاملPd/Ga2O3 methanol steam reforming catalysts: Part II: Catalytic selectivity
Structure, morphology and composition of two Pd/Ga2O3 methanol steam reforming catalysts were correlated with the associated activity and selectivity changes in the methanol steam reforming reaction and linked to studies on pure Ga2O3 supports. For both systems, that are, a Pd/Ga2O3 thin film model catalyst and a powder-supported Pd catalyst, we identified a temperature range in which the reduc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Sol-Gel Science and Technology
سال: 2022
ISSN: ['1573-4846', '0928-0707']
DOI: https://doi.org/10.1007/s10971-022-05978-8