Influence of diffusion metallization to hard alloys of WC-TiC-Co and WC-Co with functional TiC coating by Ni-Cu
نویسندگان
چکیده
منابع مشابه
TEM INVESTIGATIONS OF WC-Co ALLOYS AFTER CREEP EXPERIMENTS
Carbide tungsten cobalt alloys were deformed in compression or in three point bending in a temperature range 1000-1350°C and in a stress domain 30-1000MPa. In these conditions, the stress exponent n of WC-CO alloys is a function of only the cobalt volurnic ratio and tends tow rds n = 1 for pure B carbide. The apparent activation energy is 550 kj mole. T.E.M. investigations on pure carbide defor...
متن کاملThe Influence of Carbon Content and Additions of Growth Inhibitors (V,Cr) on the Formation of Melt in WC-Co and WC-Ni Alloys
The start of melting as well as the melting range in WC-Co and WC-Ni hardmetals is significantly influenced by the alloy gross carbon content as well as by additives (V, Cr). Both Vanadium and Chromium significantly lower the start of melting but also broaden the melting range, in particular at low carbon content (formation of M6C-phases). As a result, a certain temperature range can be defined...
متن کاملDiffusion bonding of hardmetals (WC-Co) with metallic interlayers
Diffusion bonding of hardmetals (WC-Co) to themselves or with other metallic material (mildsteel) has been evaluated in the present paper. Metallographic studies and mechanical tests have been used to determinate the influence of the bonding parameters (temperature, pressure and time) on the bond microstructure and strength. Different metallic interlayers applied in form of thick foils were use...
متن کاملبررسی رفتار سایشی کامپوزیتهای WC-10wt%Co تجاری، WC-40vol%Co و WC-40vol%FeAl-B در دمای محیط
در این پژوهش رفتار سایشی کامپوزیتهای تجاری WC-10wt%Co (H10F)، WC-40vol%Co و کامپوزیتهای WC-40vol%FeAl-B با مقادیر مختلف بور از صفر تا ppm1000 به روش پین روی دیسک بررسی شد. آزمونهای سایش در دمای محیط، تحت بار 40 نیوتن و طی مسافت 100 متر انجام شدند. سطوح سایش به وسیله میکروسکوپ الکترونی روبشی (SEM) مورد بررسی قرار گرفت. نتایج نشان داد که در بین نمونهها، کامپوزیت WC-40vol%FeAl بدون بور کمترین ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/862/2/022036