Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process

Optimization of Cutting Parameters for Surface Roughness in Turning

The optimized cutting parameters are very important to control the required surface quality. In the present study, Taguchi method is used to find the optimal cutting parameters for surface roughness (Ra) in turning. The L-18 orthogonal array, the signal-to-noise ratio & analysis of variance are employed to study the performance characteristics in turning operations of AISI-410 steel bars using ...

Influence of machining parameters on surface roughness and dry friction

Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...

Effect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel

ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...

Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces

Influence of Process Parameters on Surface Roughness in Abrasive Waterjet Cutting of Titanium

Abrasive waterjet cutting is one of the nontraditional machining processes capable of cutting wide range of hard-to-cut materials. This process incurs relatively higher initial investment, maintenance and operating costs. Therefore optimum choice of the process parameters is essential for the economic, efficient and effective utilization of this process. This paper assesses the influence of pro...