Influence of cutting edge radius on surface integrity and burr formation in milling titanium
نویسندگان
چکیده
منابع مشابه
Influence of Cutting Edge Shape on Residual Stresses of Cut Surface* (Effects of Nose Radius and Cutting Edge Roundness)
In order to obtain basic information on the improving the surface integrity of machined surfaces, the relationship between the residual stress of cut surfaces and the cutting edge shapes of cutting tools was examined. Dry facing on a lathe was performed with cutting tools that had various nose radiuses and cutting edge roundnesses. The residual stresses of the cut surfaces were measured by X-ra...
متن کاملBurr Formation in Fly-cutting
Micro-groove is one of the most important features in mechanical, electronic, photonic, and bio-medical components. In recent years, fabircation of micro-grooves became increasingly important with an advancement of product miniaturisation. It is realised that in micro-machining of grooves, the principal problem is the presence of burrs along the feature edges and also the profile inaccuracy aff...
متن کاملInfluence of Milling Conditions on the Surface Quality in High-Speed Milling of Titanium Alloy
The study was focused on the machined surface quality of titanium alloy under different milling conditions, including milling speed, tool rake angle and cooling method. The surface quality was investigated in terms of residual stress and surface roughness. The results show that the compressive residual stresses are generated on the machined surface under all milling conditions. The compressive ...
متن کاملModeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling
In micro-milling, cutting forces generate non-negligible tool deflection, which has a significant influence on the machining process and on workpiece accuracy. This paper investigates the tool deflection during micro-milling and its effect on cutting force and surface generation. The distribution of cutting forces acting on the tool is calculated with a mathematical model that considers tool el...
متن کاملExperimental Study on Milling CFRP with Staggered PCD Cutter
Carbon fiber reinforced plastics (CFRP) have good physical properties, such as high specific strength and high specific modulus. However, cutting delamination, tearing and burr, etc. often occur in the machining process of CFRP, which results in the uncontrollability of machining surface quality and serious tool wear. In this paper, milling of CFRP with a staggered cutter was carried out, the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2012
ISSN: 0268-3768,1433-3015
DOI: 10.1007/s00170-012-4507-3