Influence of Crystal Grain Size on Fracture Initiation in Mild Steel
نویسندگان
چکیده
منابع مشابه
SYNERGISTIC INFLUENCE OF NITRITE ON INHIBITION OF MILD STEEL CORROSION IN CHLORIDE CONTAMINATED ALKALINE SOLUTION
Corrosion behavior of mild steel in chloride contaminated alkaline solution has been studied for the period up to 100days. Saturated Calcium hydroxide solution was used as alkaline solution and 0.5M NaCl solution was used to accelerate mild steel corrosion. The Charge transfer resistance Rct, Current density Icorr and inhibition efficiency values were obtained from tafel polarization and electr...
متن کاملThe Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel
The grain size refinement of AISI 422 martensitic stainless steel in the temperature range of 950-1150 ºC was investigated by hot deformation tests. The deformed specimens were held at deformation temperature with delay times of 5 to 300s after achieving a strain of 0.3. The austenite grains exhibit a considerable growth at temperature higher than 1050˚C, while the grain coarsening is negligibl...
متن کاملthe influence of corpus luteum on follicular fluid composition from different size follicles and their relationship to serum concentrations in sanjabi ewes
the aim of the present study was to determine the in?uence of presence or absence of corpus luteum (cl) on hormonal and metabolites composition of follicular ?uid (ff) harvested from different sized follicles and its relationship with blood serum concentrations in sanjabi ewes. ovaries and blood samples were collected from 60 clinically healthy adult ewes (sanjabi breed) 1–3 years of age in dio...
Quantifying the dependency of uniform corrosion of structural steel on grain size
The dependency of uniform corrosion of structural steel on the average grain size (D) should be quantified for design purposes. In the present work, a spectrum of grain sizes was obtained by simple heat treatment routes in st37 structural steel. It was revealed that the corrosion current density (icorr) increased by grain refinement, which was related to the increased density of grain boundarie...
متن کاملGrain Size Effect on the Hot Deformation Processing Map of AISI 304 Austenitic Stainless Steel
In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression test at the temperature range of 950-1100 °C and the strain rate of 0.005-0.5% s-1. At first, the relationship between the peak stress and Zener-Hollomon parameter w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Institute of Metals
سال: 1972
ISSN: 0021-4434,2432-4701
DOI: 10.2320/matertrans1960.13.6