Influence of Carbon Content on Superplastic Behaviour in Ti and B Doped Cr-Mo Steels
نویسندگان
چکیده
منابع مشابه
INFLUENCE OF CARBON ON THE AGEING BEHAVIOUR OF TI-13V-11CR-3AL
The effect of aging time and temperature on the microstructure and mechanical properties of Ti-13V-11Cr-3Al and Ti-13V-11Cr-3Al-0.2C was studied. The carbon addition increases the rate of age hardening as well as the peak hardness of aged samples. The presence of titanium carbides in Ti-13V-11Cr-3Al-0.2C limits grain growth during the process. The observations in this work are discussed in ...
متن کاملEffect of Mo Content on Microstructure and Property of Low-Carbon Bainitic Steels
In this work, three low-carbon bainitic steels, with different Mo contents, were designed to investigate the effects of Mo addition on microstructure and mechanical properties. Two-step cooling, i.e., initial accelerated cooling and subsequent slow cooling, was used to obtain the desired bainite microstructure. The results show that the product of strength and elongation first increases and the...
متن کاملcontent analysis of l1 and l2 writing textbooks and the perception analysis of university professors on the influence of english writing expertise on the persian in an efl context
the importance of writing as a complex skill in applied linguistics has drawn the attention of many researchers to evaluate textbooks in order to help learners gain self-sufficiency and autonomy in the field of language use and communication. investigations have shown that developments in textbooks evaluation can promote the quality of pedagogies and consequently the learning. this study attemp...
Nanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys
The microstructural evolution of Ni-20 pct Cr wires was studied during pack cementation where Al and Ti, with and without prior cementation with Mo, are deposited to the surface of the NiCr wires and subsequently homogenized in their volumes. Mo deposition promotes the formation of Kirkendall pores and subsequent co-deposition of Al and Ti creates a triple-layered diffusional coating on the wir...
متن کاملEvaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution
One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1997
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.83.12_815