Influence of biomass ash and coconut shell in scrap steel fiber reinforced concrete

نویسندگان

چکیده

To develop a sustainable concrete solution, the aggregates and cement in mixture were partially replaced with Cocos nucifera endocarp (coconut shell) aggregate biomass ash (sugarcane bagasse ash) respectively. The fresh hardened properties studied for three types of mixes (i) mix 10-30% replacement (BA), (ii) Bagasse scrap steel fiber 10 - 50% coconut shell aggregate. property is positively influenced by addition ash. With fibers workability reduces 47% when compared to control mix. slump values recorded all within permissible limit. density decreases inclusion which helps reduce dead weight structural elements. mechanical increased 5%, 6% 8% compression, split flexure modes respectively, 10% reinforced concrete. Replacement gravel affects strength properties, but limit application. SEM image analysis showed that porosity content. From test results, it was observed shell, can be effectively used as substitutes ingredients solution.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Some Studies on Steel Fiber Reinforced Concrete

Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...

متن کامل

Flexural Toughness of Steel Fiber Reinforced High Performance Concrete Containing Nano-SiO2 and Fly Ash

This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and ...

متن کامل

Comparative Study of Steel and Glass Fiber Reinforced Concrete Composites

Concrete is most widely used construction material in the world. Fiber reinforced concrete (FRC) is a concrete in which small and discontinuous fibers are dispersed uniformly. The fibers used in FRC may be of different materials like steel, G.I., carbon, glass, aramid, asbestos, polypropylene, jute etc. The addition of these fibers into concrete mass can dramatically increase the compressive st...

متن کامل

Optimizing of Steel Fiber Reinforced Concrete Mix Design

Cementitious matrices are the fragile materials that possess a low tensile strength. The addition of fibers randomly distributed in these matrices improves their resistance to cracking, substantially. However, the incorporation of fibers into a plain concrete disrupts the granular skeleton and quickly causes problems of mixing as a result of the loss of mixture workability that will be translat...

متن کامل

The Elastic Modulus of Steel Fiber Reinforced Concrete (SFRC) with Random Distribution of Aggregate and Fiber

The present paper offers a meso-scale numerical model to investigate the effects of random distribution of aggregate particles and steel fibers on the elastic modulus of Steel Fiber Reinforced Concrete (SFRC). Meso-scale model distinctively models coarse aggregate, cementitious mortar, and Interfacial Transition Zone (ITZ) between aggregate, mortar, and steel fibers with their respective materi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Gra?evinski materijali i konstrukcije

سال: 2023

ISSN: ['2335-0229', '2217-8139']

DOI: https://doi.org/10.5937/grmk2301025r