Influence of aluminium alloy type on dissimilar friction stir lap welding of aluminium to copper
نویسندگان
چکیده
منابع مشابه
Effect of Friction Stir Welding on Mechanical Properties of Dissimilar Aluminium Alloys
Friction stir welding is advance joining process for different similar and dissimilar metals. It is commonly used for joining of Aluminium alloys. In this study an attempt were made to join commercial structuralaluminium with 7039 aluminium alloy. A zig-zag pattern of hardness was found in weld nugget. Microstructural characterization and fractography of joints were examined using optical and s...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملFatigue of Friction Stir Welded 2024-T351 Aluminium Alloy
Fatigue failure characteristics of friction stir welds in 13mm gauge 2024-T351 plate have been assessed. Failure occurred from either the weld region (nugget/flow arm) or from the material immediately surrounding the weld. Fatigue failure from the surrounding material was essentially conventional, initiating from large S-phase intermetallic particles and growing in a macroscopic mode I manner. ...
متن کاملInfluence of Friction Stir Welding residual stresses on the mechanical behaviour of aluminium stiffened panels
In this work, the longitudinal residual stresses that arise from FSW processes were measured by means of the Contour Method. These residual stresses were then introduced into a numerical simulation model based on the Finite Element Method (FEM), and their effect on the buckling collapse load of aluminium stiffened panels was assessed. The sensitivity of the models to initial geometrical imperfe...
متن کاملAnalysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2013
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2013.05.004