Inelastic strain recovery of a dynamically deformed unidirectional Ag Cu eutectic alloy
نویسندگان
چکیده
منابع مشابه
Effect of Sb Addition on the Solidification of Deeply Undercooled Ag-28.1 wt. % Cu Eutectic Alloy
Ag-28.1 wt. % Cu eutectic alloy solidifies in the form of eutectic dendrite at undercooling above 76 K. The remelting and ripening of the original lamellar eutectics result in the formation of the anomalous eutectics in the final microstructure. The addition of the third element Sb (0.5 and 1 wt. %) does not change the growth mode, but enlarges the volume fraction of anomalous eutectics because...
متن کاملDISLOCATION INTERACTION WITH SEMICOHERENT PRECIPITATES (O PHASE) IN DEFORMED Al±Cu±Mg±Ag ALLOY
ÐThe interaction between dislocations and semicoherent precipitates (O phase) is discussed. The investigation shows that the semicoherent precipitate is cut by dislocations during deformation. Conventional TEM and HRTEM observations demonstrate that shearing of precipitates by dislocations occurs by multiple cutting of the precipitate. A strengthening mechanism is proposed based on this observa...
متن کاملThe Effects of Adding Elements of Zinc and Magnesium on Ag-Cu Eutectic Alloy for Warming Acupuncture
The warming acupuncture for hyperthermia therapy is made of STS304. However, its needle point cannot be reached to a desirable temperature due to heat loss caused by low thermal conductivity, and the quantification of stimulation condition and the effective standard establishment of warming acupuncture are required as a heat source. Accordingly, in this study, after Ag-Cu alloys with different ...
متن کاملInfluence of Growth Rate and Magnetic Field on Microstructure and Properties of Directionally Solidified Ag-Cu Eutectic Alloy
We report the influence of growth rate and external magnetic field on the eutectic lamellar spacing and properties of directionally-solidified Ag-Cu eutectic alloys. The results indicated that the relationship between the lamellar spacing of directionally-solidified Ag-Cu alloys and the growth rate matched the prediction of the Jackson-Hunt model, and the constant was 5.8 µm³/s. The increasing ...
متن کاملStability of Intermediate States for Ethylene Epoxidation on Ag Cu Alloy Catalyst: A First-Principles Investigation
Ethylene oxide, obtained through partial oxidation of ethylene, is an important compound for the chemical industry, because it is widely used as an intermediate for the production of chemicals such as ethylene glycol, which finds applications as an antifreeze and as a precursor to polymers. The oxidation of ethylene can lead either to the desired product (ethylene oxide, EO) or to the formation...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2016
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2016.04.043