Industrialised nanocrystalline bainitic steels. Design approach
نویسندگان
چکیده
منابع مشابه
NEW BAINITIC STEELS BY DESIGN Displacive Phase Transformations
Bainitic steels are now at the forefront of new and exciting developments in steel technology. This paper discusses how phase transformation theory is being exploited in the systematic design of every aspect of the new alloys, emphasising the immense influence that Professor Wayman has had on the development of the subject [1]. Technology of Bainitic Steels Gone are the days when industry could...
متن کاملHigh-Strength Bainitic Steels
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...
متن کاملStrong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملhigh-strength bainitic steels
with careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thinfilms of stable retained austenite have exhibited impressive combinations of strength and toughness in highsiliconbainitic steels. the silicon suppresses the precipitation of brittle cementite leading to an improvement intoughness. the essential principles governing the optimisation o...
متن کاملAir cooled bainitic steels for strong, seamless pipes Part 1 – alloy design, kinetics and microstructure
Seamless pipes are usually quenched and tempered after manufacture in order to obtain the desired properties. The possibility of avoiding this heat treatment is explored here, by designing steels which transform into an carbide free bainitic microstructure during cooling from the hot processing phase of the pipe. The cooling conditions studied are appropriate for the manufacturing process and c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Materials Research
سال: 2014
ISSN: 2195-8556,1862-5282
DOI: 10.3139/146.111090