Inductively Coupled Plasma-Atomic Emission Spectrometry

Inductively Coupled Plasma - Optical Emission Spectrometry

ACKNOWLEDGEMENTS INTRODUCTION CONTENTS 1.1 Forensic Science Investigations 1.2 Forensic Science Analysis 2 1.3 Inductively Coupled Plasma-Optical Emission Spectrometry 7 1.4 The Aims of This Investigation 8 2 INDUCTIVELY COUPLED PLASMA-OPTICAL EMISSION SPECTROMETRY 10 2 .l Introduction 2.2 The Inductively Coupled Plasma 2.3 Instrumentation Used in This Study 2.3.1 Radio Frequency Generator 2.3....

Inductively Coupled Plasma/Optical Emission Spectrometry

Microwave assisted digestion coupled with inductively coupled plasma optical emission spectrometry for determining element concentrations in halophytes

Introduction: This study was carried out to determine elements (Li, Na, K, Mg, Ca, Ba, B, Al, Si, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Ag and P) in the Suaeda vermiculata (S. vermiculata) and Suaeda aegyptiaca (S. aegyptiaca) in three different regions of Southern Iran using inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave-assisted acid digestion. Materials and ...

Marine Sediment Analysis Using Inductively Coupled Plasma Optical Emission Spectrometry

Inductively coupled plasma optical emission spectrometry was applied to the determination of trace impurities in tantalum powder. The matrix effects of tantalum in the determination of trace level impurities such as Cr, Fe, Nb, Ni, and Ti were studied by measuring the intensities of each trace element in solution at various concentrations of tantalum. As the concentration of the interfering ele...

Determination of titanium and vanadium in Ziegler-Natta catalysts by inductively coupled plasma atomic emission spectrometry.

A method for the determination of Ti and V using inductively coupled plasma atomic emission spectrometry (ICP OES) in Ziegler-Natta polymerization catalysts is proposed. The concentrations of both Ti and V are efficiently determined after catalyst acid digestion with a mixture of HNO3 + HCl + HF and heating (160 degrees C for 6 h) or with 10% (v/v) H2SO4 and heating (160 degrees C for 6 h) or w...