Indirect determination of pH in electroless copper plating bath by spectrophotometry.
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملCapillary Zone Electrophoresis for Electroless Plating Bath Samples
Capillary zone electrophoresis was used in the analysis of anions and cations in electroless plating bath samples. Examples described in this application note include the analysis of inorganic and organic anions in nickel-plating baths, cations in nickel-iron-cobalt-plating baths and metal-EDTA complexes in plating bath waste. Sample preparation was minimal, consisting merely of diluting the sa...
متن کاملBath and Deposit Monitoring System for Electroless Nickel Plating Process
Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...
متن کاملThe determination of copper in biological materials by flame spectrophotometry.
A method for the determination of the copper content of biological materials by flame spectrophotometry is described. The effects of interference by ions such as sodium and phosphate were eliminated by isolating copper as the dithizonate in CCl(4). Results obtained for the urinary excretion of copper by a patient with Wilson's disease before and after treatment with penicillamine are reported.
متن کاملPreparation and Characterization of Copper Powders with Sn Coating by the Electroless Plating
In this work, Sn-Cu composite powders were produced using an electroless process. The tin content on the surface of copper powders was varied by using di erent concentrations of SnSO4 in the plating bath. The surface morphology of the produced Sn-Cu composite powders was characterized using scanning electron microscopy (SEM). Energy dispersive spectroscopy (EDS) was used to determine the elemen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1985
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.36.289