Indeterminate Strut-Tie Model and Load Distribution Ratio of Continuous RC Deep Beams (I) Proposal of Model ＆ Load Distribution Ratio
نویسندگان
چکیده
منابع مشابه
a simple strut-and-tie model for prediction of ultimate shear strength of rc deep beams
in this paper a new method based on strut-and-tie model (stm) is proposed to determine the shear capacity of simply supported rc deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. it is assumed that, the total carried shear force by rc deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism ...
متن کاملStrut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملA Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study
Reinforced Concrete (RC) deep beams are commonly used in structural design to transfer vertical loads when there is a vertical discontinuity in the load path. Due to their deep geometry, the force distribution within the RC deep beams is very different than the RC shallow beams. There are some strut and tie model (STM) already been developed for RC deep beams. However, most of these models are ...
متن کاملLoad Transfer Mechanism Based Unified Strut-and-Tie Modeling for Design of Concrete Beams
Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as the basic tools, is conceptually simple, but its realization for complex concrete structure is not straightforward and depends on flow of internal forces in the structure. STM technique has won wide acceptance for deep member and shear design. STM technique is a unified approach that considers all ...
متن کاملRefinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams
Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Concrete Institute
سال: 2011
ISSN: 1229-5515
DOI: 10.4334/jkci.2011.23.1.003