INCREASING TECHNOLOGICAL EFFICIENCY OF FORESTRY ROADS CONSTRUCTION FROM LOW STRENGTH STONE MATERIALS
نویسندگان
چکیده
منابع مشابه
Geocell-Reinforced Crushed Stone Base for Low-Volume Roads
Crushed stone bases are widely used for low-volume roads. However, shear strength of the crushed stone materials can be vastly improved by confining the material in geocellular confinement systems or geocells. Geocells are 3-dimensional honeycomb-like structures. The objective of this study was to test a geocell design with crushed stone (AB-3) in-fill and a thin hot-mix asphalt (HMA) surface l...
متن کاملEngineering Controlled Low Strength Materials Using
An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...
متن کاملThe Efficiency of Hybrid BNN-DWT for Predicting the Construction and Demolition Waste Concrete Strength
The current study focuses on two main goals. First, with the use of construction and demolition (C&D) of building materials, a new aggregate was produced and it was utilized for green concrete production. The compressive strength test confirmed the good function of C&DW aggregate concrete. This concrete did not show significant differences with natural sand concrete. Second, Backpropagation neu...
متن کاملKnowledge-generating efficiency in innovation systems: The acceleration of technological paradigm changes with increasing complexity
Article history: Received 22 May 2014 Received in revised form 5 December 2014 Accepted 3 April 2015 Available online 24 April 2015 Time series of US patents permillion inhabitants show cyclic structureswhich can be attributed to the different knowledge-generating paradigms that drive innovation systems. The changes in the slopes between the waves can be used to indicate efficiencies in the gen...
متن کاملIncreasing Boiling Heat Transfer using Low Conductivity Materials
We report the counterintuitive mechanism of increasing boiling heat transfer by incorporating low-conductivity materials at the interface between the surface and fluid. By embedding an array of non-conductive lines into a high-conductivity substrate, in-plane variations in the local surface temperature are created. During boiling the surface temperature varies spatially across the substrate, al...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Forestry Engineering Journal
سال: 2018
ISSN: 2222-7962
DOI: 10.12737/article_5b2406128d42b4.62955095