Increasing Gas–Solids Mass Transfer in Fluidized Beds by Application of Confined Fluidization—A Feasibility Study
نویسندگان
چکیده
منابع مشابه
Intensification of mass transfer in liquid fluidized beds with inert particles
The influence of inert particles on liquid/solid mass transfer is studied in fluidized beds by using a binary-mixture of solids of differing size and density. The addition of inert particles of higher density and smaller diameter, e.g. glass beads, exerts remarkable effects on mass transfer coefficients in comparison to that of mono-component active particles at the same liquid velocity. The ex...
متن کاملEvaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds
Accurate modeling of fluidization and heat transfer phenomena in gas-solid fluidized beds is not solely dependent on the particular selected numerical model and involved algorithms. In fact, choosing the right model for each specific operating condition, the correct implementation of each model, and the right choice of parameters and boundary conditions, determine the accuracy of the results i...
متن کاملHeat Transfer Mechanisms in a Gas – Liquid-Solid Fluidized Beds
Three-Phase Fluidized Beds have found an important place in processing technology as Reactors. Gas-Liquid-Solid fluidization is considered in the present paper as operating bed of fluidized solid particles simultaneously with co-current upward flow of a continuous liquid phase and a gaseous phase dispersed in the form of bubbles. In the present study, the experimental work of the author on heat...
متن کاملA Numerical Study on Agglomeration in High Temperature Fluidized beds
Soft-sphere discrete element method (DEM) and Navier-Stokes equations were coupled with equations of energy for gas and solids to investigate the process of agglomeration in fluidized bed of polyethylene particles at high temperature. The Newton’s second law of motion was adapted for translational and rotational motion of particles and agglomerates. The cohesive force for polyethylene particles...
متن کاملapplication of brand personality scale in automobile industry: the study of samand’s brand personality dimensions
این تحقیق شخصیت برند سمند را در ایران با استفاده از مدل پنج بعدی آکر (1997) بعنوان یک چهارچوب بطور توصیفی سنجیده است. بنابر این چهارچوب که دراصل در 42 جزء (42 ویزگی شخصیتی) ودر پنج بعد شخصیتی طراحی شده بود ودر کشورها وصنایع مختلف آزموده شده بود, پرسنامه به زبان فارسی ترجمه شده و با استفاده از روشهای ترجمه معکوس و مصاحبه عمیق با 12 متخصص ایرانی به 38 جزء کاهش یافت. و نظرسنجی ای در پنج نمایندگی ا...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2019
ISSN: 2076-3417
DOI: 10.3390/app9040634