Increase on sensitivity of CR-39 by annealing.
نویسندگان
چکیده
منابع مشابه
Effect of thermal annealing on optical properties of CR-39 polymeric track detector
The samples of CR-39 polymer (TASTRAK, Bristol, England) were annealled thermally at various temperatures ranging from 100oC to 180oC for 1 hour, in air. FTIR spectroscopy reveals the structural degradation of CR-39 polymer due to thermal annealing above its glass transition temperature. Optical band gap of pristine and thermally annealed samples has been determined using UV-Visible absorption ...
متن کاملProton beam dosimetry by CR-39 track-etched detector
Background: High and intermediate energy protons are not able to form a track in a solid state nuclear track detector (SSNTD) directly. However, such tracks can be formed through secondary particles created during primary radiation nuclear reactions in a SSNTD. Materials and Methods: The protons with primary energies of 9.6 and 30 MeV available at the cyclotron accelerator with corresponding lo...
متن کاملEffect of Annealing on Track Density in Unirradiated and Gamma Irradiated Cr-39 When Used for Fast Neutron Detection*
The effect of annealing on track density in unirradiated CR-39 and gamma irradiated CR-39 neutron detectors was investigated. One group of CR-39 detectors (25.4 x 12.7 x 0.635 mm) was irradiated with 1.3 kGy of 6oCo gamma rays. The other group of detectors was not irradiated with gamma radiation. The two sets of detectors were then annealed at temperatures ranging from room temperature (2OOC) t...
متن کاملResponse of CR-39 to Heat Exposure
As a nuclear track detector, CR-39 (polyallyl diglycol carbonate) is used to reveal the products of fusion reactions. Positioned around the OMEGA target chamber, pieces of CR-39 absorb and are damaged by ejected particles. The plastic is then etched in NaOH solution at 80°C for 6 hours, resulting in the formation of nuclear tracks visible under a digital microscope. The etching process also rev...
متن کاملEffect of Pre-gamma Irradiation on Cr-39*
The effect of pre-gamma irradiation on track density, bulk etch rate and light absorbance in CR-39 was investigated. CR-39 detectors were irradiated with gamma doses over a range of 0 to 280 kGy (0 to 28 Mrad). The detectors were overlaid with 0.77 mm of polyethylene and exposed to a known fluence of 252Cf spontaneous fission neutrons. All detectors were then etched in 6.25N sodium hydroxide so...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan
سال: 1989
ISSN: 0004-7120
DOI: 10.3327/jaesj.31.468