In Situ tensile tests to analyze the mechanical response, crack initiation, and crack propagation in single polyamide 66 fibers
نویسندگان
چکیده
منابع مشابه
Crack Propagation Calculations for Optical Fibers under Static Bending and Tensile Loads Using Continuum Damage Mechanics
Static fatigue behavior is the main failure mode of optical fibers applied in sensors. In this paper, a computational framework based on continuum damage mechanics (CDM) is presented to calculate the crack propagation process and failure time of optical fibers subjected to static bending and tensile loads. For this purpose, the static fatigue crack propagation in the glass core of the optical f...
متن کاملEffects of Microstructure on Room Temperature Fatigue Crack Initiation and Short Crack Propagation in Udimet
An assessment of the effects of microstructure on room temperature fatigue crack initiation and short crack propagation in a Ni-base superalloy is presented. The assessment was carried out on microstructural variants of U720Li, including as-received U720Li, U720Li-LG (large grain variant) and U720Li-LP (large intragranular coherent γ′ variant). Fatigue tests were carried out at room temperature...
متن کاملIdentifying crack initiation and propagation thresholds in brittle rock
Recent work at the Underground Research Laboratory of Atomic Energy of Canada Limited in Pinawa, Manitoba, has shown that high compressive stresses near the tunnel face significantly contribute to the loss of strength, and eventual failure of the rock, through stress-induced brittle fracturing. A program of laboratory testing has been undertaken to investigate the effects of brittle fracture on...
متن کاملMechanical Characteristics on Fatigue Crack Propagation in Aluminium Plate
This paper present a mechanical characteristics on fatigue crack propagation in Aluminium Plate based on strain and stress distribution using the abaqus software. The changes in shear strain and stress distribution during the fatigue cycle with crack growth is identified. In progressive crack in the strain distribution and the stress is increase in the critical zone. Numerical Modal analysis of...
متن کاملDamage Description with Related Crack Initiation and Propagation Conditions
The damage accumulation condition expressed in terms of traction components on a physical plane is considered for both monotonic and cyclic loading conditions. The crack initiation is assumed to correspond to a critical value of damage parameter on a maximum damage plane. A non-local condition is formulated for singular stress or strain regimes. The model is applied to predict damage distributi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Polymer Science Part B: Polymer Physics
سال: 2019
ISSN: 0887-6266,1099-0488
DOI: 10.1002/polb.24823