In-situ synthesis of cross-linked imidazolium functionalized Poly(styrene-b-isobutylene-b-styrene) for anion exchange membranes

نویسندگان

چکیده

The cross-linked imidazolium functionalized anion-exchange membranes is in-situ prepared via reaction of chloromethylated poly(styrene-b-isobutylene-b-styrene) with 1,1’-(1,6-hexanediyl)bisimidazole and N-methylimidazole. composite a small amount modified graphene oxide grafted octadecyl propyl phenyl could be further prepared. These exhibit significantly high chemical stability ionic conductivity (σ), marked by low methanol permeability, together improved dynamic mechanical properties. reaches 2.09 × 10−2 S cm−1 at 80 °C introduction 0.5 wt% loading oxide. This membrane also behaves an excellent σ can remain ca. 82% the original value after immerged in strong alkaline medium (2 M NaOH) 60 for 500 h, which almost same as that (ca. 82%) commercial Nafion 115 acid H2SO4) h. characterized promising anion exchange materials fuel cell its conductivity, permeability.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Living cationic sequential block copolymerization: synthesis and characterization of poly(4-(2-hydroxyethyl)styrene-b-isobutylene-b-4-(2-hydroxyethyl)styrene) triblock copolymers

INTRODUCTION With the development of living cationic polymerization of isobutylene (IB)1 and styrenic monomers,2–5 the synthesis of ABA triblock copolymer thermoplastic elastomers (TPEs) with polyisobutylene (PIB) as rubbery middle segments and styrenic polymers as plastic outer segments became possible. TPEs with PIB rubbery segments inherently exhibit superior oxidative, chemical and thermal ...

متن کامل

Sulfonation and Characterization of Poly(styrene-isobutylene-styrene) Triblock Copolymers at High Ion-Exchange Capacities

In this study, a triblock copolymer, poly(styrene-isobutylene-styrene), was sulfonated to eight different levels ranging from 0.36 to 2.04 mequiv./g (13 to 82 mol% of styrene; styrene is 19 mol% of the unsulfonated block copolymer). These sulfonated polymers were characterized with elemental analysis and infrared spectroscopy to confirm sulfonation and determine accurate sulfonation levels. Inf...

متن کامل

Synthesis and Characterization of Imidazolium Salts with the Weakly Coordinating [B(C6F5)4]--.4 Anion

Weakly coordinating anions (WCAs) have been a subject of intensive research in the past decades due to their increasing importance in coordination chemistry and catalysis [1 – 6]. These applications have grown out of basic research into the special properties of anions containing hydrocarbon and fluorocarbon functionality such as [SO3CF3], [B(C6F5)4], [OTeF5] [7]. Owing to the importance of WCA...

متن کامل

Development of Imidazolium-type Anion-Exchange Membranes for Alkaline Fuel Cell Application

This study reports the development of imidazolium-type anion exchange membranes (Im-AEMs) based on the functionalization of bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) using 1-methylimdazole. Aromatic polymers bearing bromomethyl, instead of chloromethyl, functional groups were employed as base materials to avoid complicated chloromethylation which require toxic reagents. H NM...

متن کامل

Polytetrahydrofuran cross-linked polystyrene resins for solid-phase organic synthesis.

Currently, divinylbenzene cross-linked polystyrene (DVB-PS) is the polymer of choice for use in solid-phase organic synthesis (SPOS). While much research has been directed toward the optimization of linker groups for the attachment of compounds to the polymer, the development of new polymers themselves has been relatively neglected. In an attempt to overcome the shortcomings of DVB-PS and to de...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Polymer

سال: 2021

ISSN: ['1873-2291', '0032-3861']

DOI: https://doi.org/10.1016/j.polymer.2021.123682