In-situ Micromechanical Testing of Neutron Irradiated FeCrAl Alloys
نویسندگان
چکیده
منابع مشابه
Structure-Property Investigations via SEM In-Situ Micromechanical Testing
Small-scale in-situ testing within the SEM can be used to study deformation behavior in materials, providing some of the most compelling insights into mechanisms that govern mechanical properties. In-situ microand nanomechanical tests conducted on well-shaped specimens provide information about a full suite of properties of interest (e.g. yield phenomena, strength, ductility, modulus, work hard...
متن کاملIn situ nano-compression testing of irradiated copper
Increasing demand for energy and reduction of carbon dioxide emissions has revived interest in nuclear energy. Designing materials for radiation environments necessitates a fundamental understanding of how radiation-induced defects alter mechanical properties. Ion beams create radiation damage efficiently without material activation, but their limited penetration depth requires small-scale test...
متن کاملIMPROVING THE WELDABILITY OF FeCrAl ALLOYS THROUGH TiC ADDITIONS
FeCrAl alloys were prepared with TiC additions to act as hydrogen traps and improve resistance to hydrogen cracking. Weldability results showed that alloys with up to 20 wt% Al and 11 wt% Cr could be prepared crack-free with relatively small TiC additions of ~ 4 wt%. Thermogravimetric analysis of Fe-10Al-5Cr corrosion coupons with and without TiC has shown that the corrosion resistance is not s...
متن کاملIn situ Neutron Diffraction during Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys
The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start to generate internal stresses in a casting. As such, it is a key parameter in numerical modelling of solidification processes and in studying ...
متن کاملPhase transition and ordering behavior of ternary Ti – Al – Mo alloys using in - situ neutron diffraction
Neutron diffraction has been used for in-situ investigations to elucidate the phase transformation behavior of two Mo-containing TiAl alloys with compositions of Ti-44Al3Mo and Ti-44Al-7Mo (in at.%). Five different phases are present in these alloys. These include three ordered phases at room temperature, namely a2, b0 and c and two disordered phases, a and b, which occur at higher temperatures...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2020
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927620015391