In Situ Investigation of the Silicon Carbide Particles Sintering
نویسندگان
چکیده
منابع مشابه
Experimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles
In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...
متن کاملFlash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide
A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to exp...
متن کاملthe investigation of research articles in applied linguistics: convergence and divergence in iranian elt context
چکیده ندارد.
Circumstellar aluminum oxide and silicon carbide in interplanetary dust particles
A systematic NanoSIMS isotope imaging study of sub-micrometer phases in interplanetary dust particles (IDPs) has led to the discovery of two presolar grain types that previously were observed only in primitive meteorites. A 350 · 600 nm Al2O3 grain has a large O enrichment and a slight O depletion, as well as a Mg excess due to the decay of extinct Al. Because of its relatively large size and p...
متن کاملInvestigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale
In this study, an industrial polycrystalline SiC tile was successfully sintered by pressureless sintering at 2150°C for 1 hour. The physical and mechanical properties of silicon carbide including density, hardness, bending strength, and fracture toughness were evaluated. The results indicated that the mentioned properties were 3.08 g.cm-3, 2503 HV0, 249.3 MPa, and 1.23 MPam0.5</...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nanomaterials
سال: 2011
ISSN: 1687-4110,1687-4129
DOI: 10.1155/2011/728617