In situ heating TEM observations on carbide formation and α-Fe recrystallization in twinned martensite
نویسندگان
چکیده
منابع مشابه
An In-Situ TEM Study on the Formation of Gold Carbide
In this study, a freestanding graphene membrane sheet serves as a quasi transparent substrate for aberration-corrected high-resolution transmission electron microscopy, as an insitu heater, and as carbon supplier. The sheet has been previously decorated with gold nanoislands. During electron irradiation at 80 kV and at temperatures of approximately 1000K, the accumulation of gold atoms has been...
متن کاملCrystallization of TiO2 Nanotubes by In Situ Heating TEM
The thermally-induced crystallization of anodically grown TiO₂ amorphous nanotubes has been studied so far under ambient pressure conditions by techniques such as differential scanning calorimetry and in situ X-ray diffraction, then looking at the overall response of several thousands of nanotubes in a carpet arrangement. Here we report a study of this phenomenon based on an in situ transmissio...
متن کاملSimulation of an Austenite-Twinned-Martensite Interface
Developing numerical methods for predicting microstructure in materials is a large and important research area. Two examples of material microstructures are Austenite and Martensite. Austenite is a microscopic phase with simple crystallographic structure while Martensite is one with a more complex structure. One important task in materials science is the development of numerical procedures whic...
متن کاملBehaviour of TEM metal grids during in-situ heating experiments.
The stability of Ni, Cu, Mo and Au transmission electron microscope (TEM) grids coated with ultra-thin amorphous carbon (alpha-C) or silicon monoxide film is examined by in-situ heating up to a temperature in the range 500-850 degrees C in a transmission electron microscope. It is demonstrated that some grids can generate nano-particles either due to the surface diffusion of metal atoms on amor...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2018
ISSN: 2045-2322
DOI: 10.1038/s41598-018-32896-z