In Situ Catalytic Polymerization of a Highly Homogeneous PDOL Composite Electrolyte for Long‐Cycle High‐Voltage Solid‐State Lithium Batteries (Adv. Energy Mater. 39/2022)

نویسندگان

چکیده

Solid-State Lithium Batteries In article number 2201762, Maoxiang Jing, Xiangming He, and co-workers report a composite solid-state electrolyte (CSE) formed by in-situ polymerization of 1.3-dioxolane (DOL) catalyzed nano yttria stabilized zirconia. Excellent cycle stability provides new research idea for the practical application PDOL based CSE at high voltage.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrolyte and Solid-Electrolyte Interphase Layer in Lithium-Ion Batteries

The supply and the management of the energy are particularly at the centre of our daily concerns and represent a socio-economic priority. Indeed, while cars use fossil fuel as the main source of energy for over a century, the depletion of the oil reserves and the necessity to reduce the carbon dioxide emissions, stimulate the development of electric vehicles. Therefore, one of the main challeng...

متن کامل

Visualization of electrode-electrolyte interfaces in LiPF6/EC/DEC electrolyte for lithium ion batteries via in situ TEM.

We report direct visualization of electrochemical lithiation and delithiation of Au anodes in a commercial LiPF6/EC/DEC electrolyte for lithium ion batteries using transmission electron microscopy (TEM). The inhomogeneous lithiation, lithium metal dendritic growth, electrolyte decomposition, and solid-electrolyte interface (SEI) formation are observed in situ. These results shed lights on strat...

متن کامل

Developments of Electrolyte Systems for Lithium–Sulfur Batteries: A Review

*Correspondence: Zhan Lin, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, Zhejiang, China e-mail: [email protected] With a theoretical specific energy five times higher than that of lithium–ion batteries (2,600 vs. ~500Wh kg−1), lithium–sulfur (Li–S) batteries have been considered as one of the most promising energy storage systems for the electrification of veh...

متن کامل

A novel quasi-solid state electrolyte with highly effective polysulfide diffusion inhibition for lithium-sulfur batteries

Polymer solid state electrolytes are actively sought for their potential application in energy storage devices, particularly lithium metal rechargeable batteries. Herein, we report a polymer with high concentration salts as a quasi-solid state electrolyte used for lithium-sulfur cells, which shows an ionic conductivity of 1.6 mS cm(-1) at room temperature. The cycling performance of Li-S batter...

متن کامل

A PEO-based gel polymer electrolyte for lithium ion batteries

A lithium-ion conducting gel polymer electrolyte (GPE) membrane containing PEO as a polymer host and liquid electrolyte has been prepared by a simple one-step procedure. The prepared electrolyte membrane exhibits a good ionic conductivity of 3.3 10 3 S cm 1 and high lithium transference number of 0.76 at room temperature. Meanwhile, the gel polymer electrolyte membrane shows very good thermal s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced Energy Materials

سال: 2022

ISSN: ['1614-6832', '1614-6840']

DOI: https://doi.org/10.1002/aenm.202270162