In-Situ Application of High-Strength Antiwashout Underwater Concrete
نویسندگان
چکیده
منابع مشابه
the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)
cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...
Performance of High-strength Concrete
This research was undertaken to investigate performance of high-strength concrete incorporating mineral admixtures, fly ash and silica fume. For modern construction, the use of new construction materials is increasing to achieve economy and improved final results. An extensive literature search was carried out to review various engineering properties of high-strength concrete. In this study, th...
متن کاملShrinkage of High Strength Concrete
This paper presents the results of an experimental investigation carried out to evaluate the shrinkage of High Strength Concrete. High Strength Concrete is made by partially replacement of cement by flyash and silica fume. The shrinkage of High Strength Concrete has been studied using the different types of coarse and fine aggregates i.e. Sandstone and Granite of 12.5 mm size and Yamuna and Bad...
متن کاملIn situ strength assessment of concrete using recycled aggregates by means of small diameter cores.
By increasing the demolition of old concrete structures and the interest of civil industries to consume cheaper materials, using Recycled Concrete Aggregate (RCA) can cause environmental protection and decrease the construction costs. On the other hand, the high potential of Recycled Aggregate Concrete (RAC) in concrete industry was established by extensive experimental researches were performe...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Concrete Institute
سال: 2004
ISSN: 1229-5515
DOI: 10.4334/jkci.2004.16.2.283