In Plane Shear behaviour of Carbon-Peek Composite
نویسندگان
چکیده
منابع مشابه
Effect of Surface Morphology on Fatigue Behaviour of Adhesively Bonded Carbon Fibres Peek Composites
In this paper, experimental fatigue behaviour of adhesively bonded PEEK composite was investigated. PEEK based materials are considered as a high performance thermoplastic materials conferring to their good mechanical properties and chemical resistant for many aggressive environments due to their semi-crystallinity property. However, it is well known that the adhesive bonding assembly of this k...
متن کاملAdiabatic Shear Banding in Plane
the objective of analyzing the localization of deformation infO narrow bands of inDe-Shin Liu tense straining. Two different loadings, namely, the top and bOllom surfaces :.'ubjected to a prescribed tangential velocity, and these two surfaces subjected {O a Department of Mechanical and Aerospace preassigned normal velocity, are considered. In each case a material defect, flaw, or Engineering an...
متن کاملStatic and Fatigue Behaviour of Hexagonal Honeycomb Cores under In-plane Shear Loads
Due to their high specific strength and high specific stiffness properties the use of honeycomb panels is particularly attractive in spacecraft structures. However, the harsh environment produced during the launch of a satellite can subject the honeycomb cores of these sandwich structures to severe quasi-static and dynamic loads, potentially leading to static or early fatigue failures. Knowledg...
متن کاملComposite PEEK/Carbon fiber implants can increase the effectiveness of radiotherapy in the management of spine tumors.
BACKGROUND Combination of surgery and radiotherapy in the treatment of primary spine tumour can be indicated in some cases where a satisfactory oncological margin cannot be achieved. The presence of metal hardware has always limited post-operative radiotherapy due to the scattering effects of ionizing radiation or particles. The use of a fixation system (including rods and screw) fully made in ...
متن کاملThe Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating
In the present study, Ni-P-CNT composite coating was successfully fabricated via electroless plating. Scanning electron microscopy (SEM) was used to characterize the coatings. The effect of CNTs concentration in the bath on its content in the composite coatings was studied. Furthermore, the corrosion behaviour of the coatings with different contents of CNTs was evaluated using Tafel polarizatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Composites Letters
سال: 1992
ISSN: 2633-366X,2633-366X
DOI: 10.1177/096369359200100308