In-Plane Mechanical Behavior of Ancient Masonry Walls Strengthened by BFRP Composite Material
نویسندگان
چکیده
منابع مشابه
Mechanical Behavior of BFRP-Steel Composite Plate under Axial Tension
Combining the advantages of basalt fiber-reinforced polymer (BFRP) material and steel material, a novel BFRP-steel composite plate (BSP) is proposed, where a steel plate is sandwiched between two outer BFRP laminates. The main purpose of this research is to investigate the mechanical behavior of the proposed BSP under uniaxial tension and cyclic tension. Four groups of BSP specimens with four d...
متن کاملin-plane behavior of confined masonry walls with and without opening
confined masonry buildings are used in rural and urban areas of iran. they performed almost satisfactoryduring past moderate earthquakes of iran. there is not a methodology in iranian seismic code (standard 2800-3rdedition) to estimate their capacities quantitatively. in line with removing this constraint, an attempt is made to studyin-plane behavior of two squared confined masonry walls with a...
متن کاملJournal of Composites for Construction Design of FRP-Strengthened Infill Masonry Walls Subjected to Out-of-Plane Loading
4 FRP strengthening systems for infill masonry walls are typically designed to resist flexural stresses due to out-of5 plane pressure. Previous research has shown that there are potential premature failure mechanisms due to shear 6 sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for 7 strengthening of masonry walls with fiber-re...
متن کاملOut-of-plane Behavior of Urm Walls Strengthened with Nsm Gfrp Bars
Unreinforced masonry (URM) walls are prone to failure when subjected to out-of-plane loads caused by earthquakes or high wind pressures. In this context, fiber reinforced polymer (FRP) materials may be a solution to solve or lessen the effects of this overloading. This paper describes an experimental program dealing with the flexural behavior of nine concrete URM walls strengthened with glass F...
متن کاملModeling of FRP-Strengthened Infill Masonry Structures
This paper presents an analytical approach to describe the behavior and mode of failure of infill masonry structures strengthened with fiber-reinforced polymer (FRP) materials. The approach is used to simulate the response of strengthened infill masonry walls under the effect of out-of-plane uniformly distributed pressure simulating wind pressure. The approach includes a finite element analysis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Material Sciences
سال: 2017
ISSN: 2160-7613,2160-7621
DOI: 10.12677/ms.2017.76078