Improving the Efficiency of Cutting Tools through Application of Filtered Cathodic Vacuum Arc Deposition Coating Techniques: A Review
نویسندگان
چکیده
The challenge of enhancing cutting tool life has been dealt with by many research studies. However, this seems endless growing technological advancement which brings about incremental improvement in life. objective review paper is focused at assessing filtered cathodic vacuum arc deposition techniques applied on tools and their effect efficiency. particularly picks (FCVAD) among other well-identified methods coating like the Chemical Vapor Deposition (CVD) Physical (PVD). Filtered Cathodic Vacuum Arc state art technology finding wide application electronics industry medical addition to machining industry, concern paper. This made order summarize present various FCVAD coatings applications, as investigated researches area.
منابع مشابه
Deposition of permalloy films by filtered cathodic vacuum arc
The filtered cathodic vacuum arc technique was employed to deposit magnetic films such as FeNi on silicon substrate. Using the normal cathode design, tetrahedral amorphous carbon and metals films can be deposited. If a magnetic target is used, the arc spot always preferably moves to the edge of the target and then extinguishes. Therefore, the arc is not stable and no film can be deposited. A ca...
متن کاملFiltered cathodic arc deposition with ion-species-selective bias.
A dual-cathode arc plasma source was combined with a computer-controlled bias amplifier to synchronize substrate bias with the pulsed production of plasma. In this way, bias can be applied in a material-selective way. The principle has been applied to the synthesis of metal-doped diamondlike carbon films, where the bias was applied and adjusted when the carbon plasma was condensing and the subs...
متن کاملUltraviolet and visible Raman analysis of thin a-C films grown by filtered cathodic arc deposition
Amorphous carbon thin films with a wide range of sp fraction from 20 to 90% grown by filtered cathodic arc deposition have been examined by ultraviolet (UV) at 325 nm and visible Raman spectroscopy at 457 nm excitation wavelength. The comprehensive study of behaviour of G, D and T band with sp/sp content has been carried out. The upwards shift of the G peak with sp content was observed for both...
متن کاملCoating Deposition Using Vacuum Arc and Ablation Metal Plasma
An innovative concept in the development of advanced coating deposition and ion implantation method including an application of filtered DC metal plasma or ablation plasma and highfrequency short-pulsed negative bias voltage with a duty factor in the range 10–99% are considered. It was shown that plasma based ion implantation as well as ion-assisted coating deposition may be realized for metal ...
متن کاملProperties of nitrogen doped tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique
The properties of nitrogen doped tetrahedral amorphous carbon films prepared by the filtered cathodic vacuum arc technique have been studied. The doping species, nitrogen ions, were produced by an ion beam source. The nitrogen flow rate was varied from 0.5 to 10 sccm while keeping other deposition conditions constant. The nitrogen content in deposited films was determined by Rutherford backscat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2022
ISSN: ['1687-8434', '1687-8442']
DOI: https://doi.org/10.1155/2022/1450805